Model S-Series **
The S-series pumps feature non-clog, single vane impellers designed for high volume and lift performance. They are especially suited for handling sewage and industrial waste water. Each pump is tested at the factory for performance and safety.
Applications:
•Agricultural waste applications.
•Sewage and industrial waste water.
•Water treatment sludge removal.
•Hospital waste and other corrosive liquids.
MATERIALS:
•The motor casing, rotor shaft and all hardware are made of 304 stainless steel with other exposed parts made of cast iron.
•Motor protection incorporates overload protection against overheating and high amperage.
•Dual mechanical seals in a separate oil-chamber with an oil-seal ring on the outside.
•Dry motor.
•All S-models also available with slides rail systems, and also available with float switch and also available in all 316 cast stainless steel.
PERFORMANCE CURVES:
SPECIFICATIONS 50/60 Hz:
Pump Type Outlet Diameter Inch(mm) Output KW Voltage 50Hz or 60Hz Continuous Cable c*awg*m/ c*mm2*m Weight Max Solids (mm) Head M Capacity L./min Free standing KG SR-Model KG 50Hz 60Hz JS750     S 2"(50) 0.75 1 Phase 100v ~ 240v 10 150/180 3*14awg*10 30 8 21 21 JS750     S 3"(80) 0.75 8 210 3*14awg*10 30 24.6 21 21 JS1500   S 3"(80) 1.5 8 550/500 3*14awg*10 41 24.6 44 40 JST8        S 2"(50) 0.75 3 Phase 200v ~ 480v 10 150/180 4*1.25*10 28.5 8 21 21 JST8       S 3"(80) 0.75 8 210 4*1.25*10 28.5 24.6 21 21 JST15     S 3"(80) 1.5 8 550/500 4*1.25*10 37 24.6 44 40 JST22     S 3"(80) 2.2 10 600/650 4*2.0*10 47 24.6 44 40 JST37     S 3"(80)/4"(100) 3.7 12 780/750 4*2.0*10 52 24.6/38.9 35 44 JST55     S 4"(100) 5.5 15 1000/1100 4*5.5*10 85 34.7 55 55 JST75     S 4"(100)/6"(150) 7.5 23 1000/1100 4*5.5*10 90 34.7/88.6 55 55